2mag STIRRING DRYBATH 15-250 verwarmblok + roerder
Art.Nr.
L131963250

2mag STIRRING DRYBATH 15-250 verwarmblok + roerder

Art.Nr.
L131963250
Blok met 15 boorgaten diameter van 71,5 mm / 78 mm diep Temperatuur tot +200°C Elke positie voorzien van roeroptie 100 - 2.000 rpm Afmetingen (bxdxh) 335 x 515 x 150 mm Gewicht circa 35 kg Levering compleet inclusief bestuuring heatMIXcontrol
Bekijk alle specificaties
Specificaties
Specificaties
Merk 2 mag
Afscheider zuigzijde Nee
Condenser uitlaat Nee
Productbeschrijving

2mag RVS magneetroerders

  • Magneetroeders in RVS uitvoering (IP68: waterdicht, stofdicht en kiem/bacterien dicht)
  • Enkelvoudig en meervoudig tot een volume van 1000 liter
  • Uitvoeringen met gescheiden besturing (MIXdrive + MIXcontrol): geschikt voor gebruik in een water/oliebad, CO2 incubator of stoof bij temperaturen van -10°C tot +50°C (bij 100% luchtvochtigheid)
  • Met en zonder verwarming met temperatuurbereik tot +200°C / ondergedompeld in water/oliebad 50°C(MIXdrive basic) en 95°C (MIXdrive HT)
  • Speciale ATEX & cleanroom uitvoeringen

Informatie van 2mag website

Stirring-heating block combination with 15 stirring positions, 15 bore holes, ø 71.5 mm, depth 78 mm, distance 84 mm, suitable for 250 ml lab-flasks (e.g. Schott) and for 400 ml beaker glasses.

Stirring - Maintenance-free and wear-free by inductive 2mag-Magnetic Drive concept, extremely wide speed range of 100 to 2,000 rpm, 100% synchronized speed, jerk-free stirring even at low speeds, 10-step power settings of the stirrer, high power setting for viscous liquids and reduced power setting for long-term operation without any heating effects caused by the stirrer, clear digital display for settings of stirrer speed, stirrer power and temperature of the integrated heater, SoftStart procedure for reliable catching/centering and safe acceleration of the stirring bar.

Heating - Massive heating block made of resistant aluminium alloy, PTFE-coated for increased chemical resistance and easier cleaning, lowest possible temperature gradient inside the stirring vessels, integrated electrical heater, maximum heating temperature +200 °C, PowerDetect for automatic compensation of physically determined loss in stirring power which can come up to 40% at high temperatures, specially made insulated stainless steel frame for energy- and time saving heating process, additionally for a homogenous temperature distribution and protection against accidental contact, independent over-temperature protection inside the plate.

Inclusive separate control unit for operation of magnetic stirrer and integrated heater, for long-term protection of the electronics against aggressive liquids and gases as well as thermal influences, stainless steel housing.

Type STIRRING DRYBATH 15-250
Stirring positions 15
Stirring positions distance 84 mm
Bore holes Ø/T Ø 71.5 / 78 mm
Stirring volume/stirring point 1 - 400 ml
Stirring power (max.) 40 W
Power setting 4 - 40 W (10-step)
Temperature (max.) +200 °C
Speed range 100 - 2,000 rpm
Electrical data 230 V / 1,000 W
Dimensions (WxDxH) 335 x 515 x 150 mm
Protection category IP20
Weight (gross) approx. 31 kg

 

Accessoires
Downloads
Video

  • Hoge kwaliteit en uitgebreide service
  • Al meer dan 100 jaar een begrip
  • Een breed assortiment
Scroll to top