FDM T700BXPRO temperatuur testkast enkeldeur -25/+70°C 530 l
Art.Nr.
L325T700BXPRO

FDM T700BXPRO temperatuur testkast enkeldeur -25/+70°C 530 l

Art.Nr.
L325T700BXPRO

Temperatuurwisselkast
Volume 530 liter
Temperatuurbereik -25 tot 70°C
Temperatuur stabiliteit ± 0.1°C
Temperatuur uniformiteit ± 1°C
Opwarmsnelheid 1.5°C/min volgens EN 60068-3-5
Afkoelsnelheid -0,8°C/min volgens EN 60068-3-5 
PLC regelaar programmeerbaar met 1 programma met 20 stappen
Afmeting intern (bxdxh): 600 x 670 x 1350 mm
Afmeting extern (dxdxh): 750 x 820 x 2100 mm
Vermogen circa 1500 W / 220V

(afbeelding op wielen gemonteerd)

Installatie en uitleg op aanvraag

Bekijk alle specificaties

Sorry, dit product kunt u niet toevoegen aan uw winkelwagen.

Vul onderstaande gegevens in en wij maken zo snel mogelijk een concrete offerte voor u op.

Specificaties
Specificaties
Merk FDM
Licht Nee
Volume 530 liter
Min. Temperatuur -25
Max. Temperatuur 70
Productbeschrijving

FDM T700SXPRO temperatuur testkast enkeldeur -25-70°C 530 liter

Temperature cycling chambers

 Products which reach the final market must always be thoroughly vetted and found complying to set regulations. This involves strict stress-testing of materials to determine their quality, reliability and resistance to external factors. One could say that tests such as thermal shock testing are a crucial stage of a product’s life. This is why the FDM temperature cycling chambers are your ideal testing grounds for non-volatile, non-flammable and non-hazardous materials. Test the limits of your products in a safe environment, guaranteed to provide you with only the most precise and efficient results.

Indeed, tests are carried out in a matter of seconds and results are handed over almost instantaneously. The Thermal Cycling Test Chambers are one such example in the FDM thermal test chambers series, where temperatures fluctuate to give you the ultimate capability in material shock testing. These augmented test experiences stress the very limits of your materials: through the Rapid-Rate Thermal Cycle Chamber you can have in-depth insights into the impact of rapid change in temperatures on your materials.

This would allow you the possibility to test for cracking, expanding, mechanical failures, etc. Launch your product to the market in peace of mind. With temperature cycling chambers from Italy-based FDM, you will see your products go through a thorough and alternating temperature cycle. Your materials will be battle-hardened and are thus guaranteed endure for much, much longer.

Accessoires
Downloads
  • Hoge kwaliteit en uitgebreide service
  • Al meer dan 100 jaar een begrip
  • Een breed assortiment
Scroll to top