Tel: 0320 266 171

  • Gerenommeerde merken met uitgebreide productspecificaties
  • Oplossingsgericht denken, service en bereikbaarheid
  • Productspecialisten met uitgebreide kennis, o.a. verkregen bij leveranciers
  • Technische dienst voor onderhoud en garantie van aangekochte apparatuur

Heraeus CO2-Broedstoof Cytoperm 2

Artikelnr: L0151011659
Inhoud 220 liter
Met 180 C desinfectiesysteem
Kompleet met 6-delig gassluissysteem,
gedeeld interieur en halve bladen
Afmetingen intern (bxdxh) 66,9 x 60,7 x 58,8 cm
Gewicht 107 kg

Specificaties

Uitgebreide informatie

Heraeus CO2-Broedstoof Cytoperm 2

Handle sensitive or infectious samples simply while maxmizing safety and protecting against contamination with the Thermo Scientific™ Cytoperm™ 2 CO2 Gassed Incubator.

Key Features:

  • Cytoperm 2 controls temperature, CO2 content and relative humidity levels
  • Convenient hot air disinfection at 180°C without the need for removing fittings or sensors
  • External water reservoir—no open water surface areas inside, effectively counteracting contamination
  • Air-jacket heating system maintains constant and stable temperatures on all interior surfaces
  • Six individually sealed glass doors minimize changes to the atmosphere during opening, shortens recovery times significantly and reduces contamination risk
  • Unique pyrolytic germ barrier sterilizes external humidity water prior to introduction into the culture chamber
  • Full humidity control and display
  • Constant environmental parameter monitoring
  • Thermal Conductivity (TC) CO2 sensor for excellent long-term stability and reliability

Compatible with:

  • Support frame, height 300mm (50031348)
  • Support frame, height 780mm (50029597)
  • Rack to stack two units (50053628)
  • Additional stainless-steel shelf, half width including two shelf supports (50029943)
  • Gas cylinder monitor with audible signal, 120/230 V 50/60 Hz (50046033)
  • CO2 cylinder pressure regulator (03429937)
  • N2 cylinder pressure regulator (03429942)
  • O2 cylinder pressure regulator (03429943)

Technical data

Chamber Material Electropolished stainless steel
Disinfection Time 180°C/3 hr.
CO2 Concentration Range 0 to 20%
CO2 Sensor Technology TC
Oxygen Control Not Included
O2 Sensor Technology N.A.
Humidity Delivery external reservoir
Relative Humidity fully controllable, ambient to 90%
Temperature Range (Metric) ambient +5C to 50C
Height (English) Exterior 30.5 in.
Height (Metric) Exterior 66.9cm
Width (English) Exterior 36.2 in.
Width (Metric) Exterior 60.7cm
Length (English) Exterior 33.7 in.
Length (Metric) Exterior 58.5cm
Height (English) Interior 23 in.
Height (Metric) Interior 58.8cm
Depth (English) Interior 26.3 in.
Depth (Metric) Interior 66.9cm
Width (English) Interior 23.1 in.
Width (Metric) Interior 60.7cm
Net Weight (English) 235 lb.
Net Weight (Metric) 107kg/unit
Shelves 6/16 (supplied/max)
Length (English) Shelf 10.25 in.
Length (Metric) Shelf 26cm
Width (English) Shelf 19.7 in.
Width (Metric) Shelf 50cm
Voltage 230V
Data Outputs RS232
Cabinet Material cold rolled steel
Capacity (English) Shelf 11.02 lb./shelf, 66.14 lb. total
Capacity (Metric) Shelf 5kg/shelf, 30kg total
CO2 Concentration Control ±0.1%
Hertz 50/60Hz
Ports 2cm access port in rear wall
Capacity (English) 7.7 cu. ft.
Capacity (Metric) 220L
Item Description CO2
Shelf Material Electropolished Stainless-steel
Wattage 1.2kw
Dimensions (D x W x H) Interior 26.3 x 23.1 x 23 in. (66.9 x 60.7 x 58.8cm)
Capacity 7.7 cu. ft., 220L
Electrical Requirements 230V 50/60Hz
Dimensions (L x W x H) Exterior 33.7 x 36.2 x 30.5 in. (58.5 x 60.7 x 66.9cm)

Product PDF's

afbeeldingL0151011659
Toon de afbeelding

Informatie aanvragen - advies

Contactform 2

  • Reload captcha

* required fields