Tel: 0320 266 171

  • Ruim 60 jaar leverancier
  • Ruim 40 A-merken
  • Eersteklas service & kwaliteit
  • Maatwerk tot industriële schaalgrootte

Memmert IPP400 koelbroedstoof 384 liter 0 tot +70°C

Artikelnr: L1326IPP400
Inhoud 384 liter, dubbeldeurs op wielen
Afmeting intern (bxdxh): 640 x 500 x 1200 mm
Afmeting extern (bxdxh): 824 x 788 x 1720 mm
Temperatuurbereik 0 tot 70°C
Verwarmen en koelen met Peltier techniek
SingleDisplay bediening
RVS uitvoering met glazen tussendeur
Energiezuinig en trillingsvrij
Inclusief 2 draadroosters (maximaal 14 stuks mogelijk)
Gewicht circa 157 kg
Aansluiting 220V circa 1100 watt


Uitgebreide informatie

Memmert IPP400 koelbroedstoof 384 liter 0 tot +70°C

Peltier-cooled incubator IPP400 - standard delivery Peltier-cooled incubator

With the help of our model selection, with dimensioned model sketches and extensive technical data for download, you will find your perfect Peltier-cooled incubator. For large volumes in conjunction with rapid temperature changes, the Memmert compressor-cooled incubator is recommended. Flexibility and technical features of our appliances meet all possible needs. Put us to the test!



Working temperature range from 0°C to +70°C
Setting accuracy temperature 0.1 °C
Temperature 1 Pt100 sensor DIN class A in 4-wire-circuit

Control technology

Language setting German, English, Spanish, French, Polish, Czech, Hungarian
ControlCOCKPIT SingleDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display
Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT the process time does not start until the set temperature is reached
Calibration three freely selectable temperature values
adjustable parameters temperature (Celsius or Fahrenheit), programme time, time zones, summertime/wintertime


Convection forced ventilation by Peltier fan


Documentation programme stored in case of power failure
Programming AtmoCONTROL software for reading out, managing and organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand).


Temperature control adjustable electronic overtemperature monitor and mechanical temperature limiter
Autodiagnostic system for fault analysis

Heating concept

Peltier energy-saving Peltier heating-/cooling system integrated in the rear (heat pump principle)

Standard equipment

Door fully insulated stainless steel door with 2-point locking (compression door lock)
Internals 2 stainless steel grid(s), electropolished
Works calibration certificate for +10°C and +37°C
Door inner glass door

Stainless steel interior

Volume 384 l
Dimensions w(A) x h(B) x d(C): 640 x 1200 x 500 mm
Max. number of internals 14
Max. loading of chamber 200 kg
Max. loading per internal 20 kg

Textured stainless steel casing

Dimensions w(D) x h(E) x d(F): 824 x 1720 x 756 mm
Housing rear zinc-plated steel

Electrical data

Voltage Electrical load 230 V, 50/60 Hz
approx. 1100 W
Voltage Electrical load 115 V, 50/60 Hz
approx. 1100 W

Ambient conditions

Set Up The distance between the wall and the rear of the appliance must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances must not be less than 5 cm.
Ambient temperature 16 ºC to 40 ºC
Humidity rh max. 70 %, non-condensing
Altitude of installation max. 2,000 m above sea level
Overvoltage category II
Pollution degree 2

Packing/shipping data

Transport information The appliances must be transported upright
Customs tariff number 8419 8998
Country of origin Federal Republic of Germany
WEEE-Reg.-No. DE 66812464
Dimensions approx incl. carton w x h x d: 93 x 193 x 93 mm
Net weight approx. 157 kg
Gross weight carton approx. 210 kg

Product PDF's

Bijpassende producten

Toon de afbeelding
afbeeldingL1326IPP400 Detailtekening

Informatie aanvragen - advies

Contactform 2

  • Reload captcha

* required fields