- Hoge kwaliteit en uitgebreide service
- Al meer dan 100 jaar een begrip
- Een breed assortiment
Memmert IN30plus broedstoof zonder ventilator 32 liter
Art.Nr.
L1326IN30PLUS
Inhoud 32 liter
Natuurlijke luchtcirculatie
Twin display met touchscreen
Afmeting intern (lxbxh): 400 x 250 x 320 mm
Temperatuurbereik KT+ 5 tot +80°C
RVS Behuizing en interieur
Makkelijk schoon te maken
Over- en ondertemperatuur alarm
Inclusief 1 draadrooster (max. 3 mogelijk)
Gewicht circa 48 kg
- Memmert INE200
- Memmert BE200
- Memmert INP200
- Memmert BP200
Merk | Memmert |
---|---|
SafeSens pH monitoring | Nee |
Stapelbaar | Ja |
Timelapse functionaliteit | Nee |
Licht | Nee |
Volume | 32 liter |
Min. Temperatuur | 30 |
Max. Temperatuur | 80 |
Memmert IN30plus broedstoof / incubator
- Nieuwe bediening Single en Twin display en software Atmo Control (zie ook video onderaan deze site)
- De plus modellen zijn voorzien van het Twin display en bieden de mogelijkheid voor uitgebreide programmering en registratie
- Nieuwe deurklinken zijn makkelijk te openen ook met 1 hand, elleboog of knie
Ventilation & Control
- natural convection
- adjustment of pre-heated fresh air admixture by air flap control in 10 % steps for each segment individually
- vent connection with restrictor flap
- adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays
- self-diagnostics for fault analysis
- 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
- Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
- parameters adjustable on ControlCOCKPIT: temperature (Celsius or Fahrenheit), air flap position, programme time, time zones, summertime/wintertime
- SetpointWAIT function - the process time does not start until the set temperature is reached
- AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port
- Setting of languages on ControlCOCKPIT: German/English/Spanish/French
- resolution of display for setpoint and actual temperature values 0.1°C
- calibration facility directly at ControlCOCKPIT for three freely selectable temperature values
- programme stored in case of power failure
- fixed sterilisation programme (4 hours/160°C) for sterilisation of working chamber, not for sterilising the load
- incl. works calibration certificate for +37°C
Multiple overtemperatur protection
- with audible and visual alarm
- overtemperature monitor TWW, protection class 3.1 or adjustable temperature limiter TWB, protection class 2, selectable on display
- additionally integrated over- and undertemperature monitor "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating is switched off in case of overtemperature
- mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature
Textured Stainless Steel casting
- w x h x d: 585 x 704 x 434 mm
- fully insulated stainless steel door with 2-point locking (compression door lock)
- inner glass door
- rear zinc-plated steel
Interior - heating concept
- w x h x d: 400 x 320 x 250 mm, 32 l
- easy-to-clean interior,made of stainless steel,reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
- 1 stainless steel grid
- Max. loading of chamber: 60 kg
Temperature Range
- min.5°C above ambient up to +80°C
Voltage / Power Rating
- 230 V (+/- 10 %), 50/60 Hz / approx. 1.600 W
Andere bezoekers bekeken ook